You are here: Home » Products » SANWOOD Test Chambers » High and Low Temperature Explosion-proof Test Chamber
You are here: Home » Products » SANWOOD Test Chambers » High and Low Temperature Explosion-proof Test Chamber

High and Low Temperature Explosion-proof Test Chamber

Share to:

High and Low Temperature Damp Heat Test Chamber is widely applicable to aircraft industry, automobile industry,semiconductors,chemicals,pharmacy,foodstuffs,home appliance industry and scientific research field.

Product Description


High and low temperature explosion-proof test chamberStructure and Characteristics:


1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.

     

2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.

     

3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.

     

4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function.

     

5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.

     

6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts.

     

7.Input mode PT100 sensor.

     

8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.


9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.


10.With larger transparent viewing window and lighting inside to observe the test.


11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.


12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.


13.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.



High and Low Temperature Explosion-proof Test Chamber Specification:


ModelSMC-408-CC-FBSMC-800-CC-FBSMC-1000-CC-FBSMC-1500-CC-FB
TemperatureTemperature control
 range
-70℃~180℃
(A:0℃~180℃;B:-20℃~180℃;C:-40℃~180℃;D:-70℃~180℃)
Temperature fluctuation±0.5℃
Cooling rate180.0℃~-70.0℃  Within 100 mins  1.0~3.0℃/min
Heating rate-70.0℃~180.0℃  Within 60 mins  3.0~5.0℃/min
Temperature uniformity±1.5℃ (-40.0℃~100.0℃) 
±2.0℃ (100.1℃~180.0℃or-40.0℃~-70.0℃)
HumidityHumidity control range10.0%RH~98.0%RH (60℃ above corresponds to 10%RH) 
Humidity fluctuation±1.0% RH
Humidity uniformity±2.0%RH 
Material /
 components 
Internal materialAdopts 1.2mm thickness stainess steel(SUS304)
External materialAdopts 1.2mm thickness Cold rolled steel sheet / powder spraying
 Heat insulating material100mm thickness polyurethane plate+10mm thickness mineral wool
FanCentrifugal blower
CompressorSemi-closed Germany Bock, Germany Bitzer
CondenserAir cooling, water cooling
RefrigerantR404A、R23、R508
EvaporatorFin - and - Tube Heat Exchanger 
HeaterNickel chromium alloy heating wire 
HumidifierSteam humidifier 
OptionsStandard configuration2 ∅100MM pressure relief port, 4 explosion-prood chains
Multipoint temperature
 monitor
Adopts Sanwood developed controller, which can be used
 to acquire surface temperature points of multiple products
C02 fire extinguisherAutomatic fire extinguishing and automatic shutdown 
of the machine to protect the equipment from burning
C0, H2 gas detectorWhen the battery will produce gas, it will detect gas solubility
 and discharge to outdoor when it exceeds the standard
Exhaust valveWhen the test sample produces harmful gas, ventilate and exhaust internally
Size Interior size(mm)
W*H*D
800*850*6001000*1000*8001000*1000*10001200*1000*1250
Outer size(mm)
W*H*D
1000*2050*14001200*2100*15901200*100*17801400*2100*2030
Volume(m³)408L800L1000L1500L
Weight620680840955
Operating ambient temperature+5 ~ 35℃
Power supply380V AC 
50/60Hz  17A
380V AC  
50/60Hz  25A
380V AC 
50/60Hz  27A
380V AC 
50/60Hz  50A
ControllerStandard: South Korea TEMI-1500  
Optional: South Korea TEMI-2500,South Korea TEMI-2700



Leave Message

CONTACT US

Guang dong Sanwood Technology Corporation.,limited

QUICK LINK

INCUBATOR SERIES

CONTACT INFO

 Tel:+86-769-81182799
 E-mail: info@sanwood.cc
 Add: No.88, Songchang Road, Songbotang , 
 Changping, Dongguan,  Guangdong

SUBSCRIBE

Be the first to know about our lastest products.
Copyright © 2015 Guangdong Sanwood Technology Corporation.,Limited All Rights Reserved.
Site Map
Яндекс.Метрика