- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
Product Description
SM02 Pneumatic Vertical Shock Bump Test System is featured with advanced design, high degree of automation and reliability, simple operation and convenient maintenance. The system meets the requirements of both shock and collision test, can perform conventional half-sine wave, post-peak sawtooth wave, square wave and other waveform shock tests.
Technical Specifications
| Model | SM02－25 | SM02－50 | SM02－100 | SM02－200 | SM02－400 | SM02－600 | SM02－800 | SM02－1000 | SM02－2000 | |
| Parameters | ||||||||||
| Rated Load (kg) | 25 | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | 2000 | |
| Table Size (mm) | 300×300 | 500×500 | 600×600 | 800×600 | 800×800 | 1000×800 | 1000×1000 | 1200×1200 | 1500×1200 | |
| Peak Acc. (G) | Half-Sine | 10～850 | 10～700 | 10～300 | 10～200 | 10～100 | ||||
| Post-Peak | 10～200 | 10～200 | 10～100 | 10～60 | 10～50 | |||||
| Sawtooth | ||||||||||
| Trapeziod | 15～100 | 15～60 | 15～50 | |||||||
| Pulse Duration (ms) | Half-Sine | 0.8～40 | 1～40 | 1.5～40 | 2～40 | 3～40 | 4～40 | 6～40 | ||
| Post-Peak | 3～18 | 6～18 | ||||||||
| Sawtooth | ||||||||||
| Trapeziod | 6～12 | |||||||||
| Bump Waveform | Half sine wave | |||||||||
| Bump Peak Acceleration | 50～1500 | 50～1000 | 50～800 | 50～600 | 50～400 | |||||
| （m/s2） | ||||||||||
| Bump Pulse Duration (ms) | 3～30 | |||||||||
| Overall Dimension (mm) | 1400×1200 | 1600×1400 | 1700×1500 | 1700×1500 | 1900×1500 | 1900×1500 | 2000×1500 | 1900×1800 | 2200×1800 | |
| ×2300 | ×2300 | ×2300 | ×2300 | ×2450 | ×2450 | ×2450 | ×2550 | ×2550 | ||
| Weight (kg) | 1000 | 1800 | 2500 | 2800 | 3800 | 4000 | 4800 | 5200 | 6000 | |
| Max. bump Rate | 100 | 80 | 60 | 50 | 40 | 30 | 20 | |||
| (Times/Min) | ||||||||||
| Power Requirements for | AC220V±10%，50Hz，2kVA | |||||||||
| Table | ||||||||||
| Power | AC220V±10%, 50Hz, 3kVA or AC380V±10%, 50Hz, 5kVA | |||||||||
| Requirements for | ||||||||||
| Air Compressor | ||||||||||
| Air Source | Air source output pressure is no greater than 1.0Mpa. If there is no air source in the lab, air compressor needs to be configured; if there is air source in the lab, and there is ahigh requirement for bump frequency times, a corresponding air tank needs to be configured. | |||||||||
| Conditions | ||||||||||
| Working Environment | Temperature range 0 ~ 40℃; Humidity ≤ 90% (25℃), non-condense | |||||||||
| Standards | MIL-STD-810F IEC68-2-27 | |||||||||
