Home » News » Temperature and Humidity Test Chamber

Temperature and Humidity Test Chamber

Views:10     Author:Site Editor     Publish Time: 2018-07-19      Origin:Site

Temperature and Humidity Test Chamber Basic introduction:

Environmental test chamberr/constant temperature and humidity chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.

Need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement.


Six advantages of Sanwood Temperature and Humidity Test Chamber:
1.Evaporator no frosting under longtime Low temperature and low humidity running.
2.Automatic control system refrigerant demand save electricity above 30%
3.High heat load tested samples test environment
4.realize 95℃ 95%high temperature and high humidity environment.
5.10% 20 ℃ ultra-low temperature range control ability
6.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German  multilingual language switching.



QQ图片20180709175607

QQ图片20180709175513

落地式恒温恒湿试验箱


Temperature and Humidity Test Chamber Specification:


Model SMC-80-CC SMC-150-CC SMC-225-CC SMC-408-CC
Temperature Temperature range -70℃~180℃(A:0℃~180℃;B:-20℃~180℃;C:-40℃~180℃;D:-70℃~180℃)
Temperature fluctuation ±0.5℃
Cooling rate 180.0℃~-70.0℃  Within about 100 minutes1.0~3.0℃/min
Heating rate -70.0℃~180.0℃ Within 60 mins 3.0~5.0℃/min
Temperature uniformity ±1.5℃ (-40.0℃~100.0℃) 
±2.0℃ (100.1℃~180.0℃or-40.0℃~-70.0℃)
 Humidity Humidity range 10.0%RH~98.0%RH(60℃ above corresponds to 11%RH) 
Humidity fluctuation ±1.0% RH
Humidity uniformity ±2.0%RH 
Material Internal material SUS304 stainless steel(1.2mm)
External material cold-rolled plate(1.2mm),powder coating
Heat insulation polyurethane foam(100mm)+glass wool(10mm)
Fan Centrifugal fan(Impeller Fan)
Refrigeration compressor hermetic compressor(Tecumseh)
Cooling mode air cooling or water cooling
Refrigerant R404A、R23、R508
Evaporator finned-tube exchanger 
Heater nickel chrome strip heater
Humidifier Steam Humidifier
Size  Interior size(mm)
W*H*D
400*500*400 500*600*500 500*750*600 800*850*600
Outer size(mm)
W*H*D
700*1630*1180 700*1670*1275 700*1880*1290 1000*1950*1400
Volume(L) 80L 150L 225L 408L
Weight(kg) 280 380 450 620
Working Temperature +5 ~ 35℃
Power supply

220V AC 

 50/60Hz  22A

220V AC 

 50/60Hz  31A

220V AC 

 50/60Hz  33A

380V AC  

50/60Hz  17A

Controller Standard: South Korea TEMI-1500
Optional: South Korea TEMI-2500,South Korea TEMI-2700

Joy Li

Guangdong Sanwood Technology Corporation.,limited

ADD: No.88, Songchang Road, Songbotang, Changping, Dongguan, Guangdong

TEL: +86+769-81182799

FAX: +86+769-82987199

E-mail: sales7@climatic-chambers.com.tw

Website: http://www.sanwood.cc


Leave Message
Contact Us

Guangdong Sanwood Technology Co.,Ltd

About Sanwood

Contact Info

 Tel:+86-769-81182799
 E-mail:
 info@sanwood.cc
 Add: 

No.88, Songchang Road, Songbotang, Changping, Dongguan 523560, Guangdong, China

Copyright © 2021 Guangdong Sanwood Technology Co.,Ltd
All Rights Reserved.

Site Map
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×