Bench-top Xenon lamp aging test chamber

Bench-top Xenon lamp aging test chamber Characters

◆The test procedures of Bench-top Xenon lamp aging test chamber can be programmed freely; and upto 16 predetermined procedures can be saved in one time. Every procedureincludes up to 10 segments setting data.
◆Bench-top Xenon accelerated aging test chamber Can set the cumulative energy （total irradiance energy）obtained by sample to finish a testprocedure.  
◆ With spray function, can set spray time and sprayinterval time.
◆The xenon light source correspond with internationalstandards; ensure reproducibility and comparability of testing results.
◆ Irradiance energy can be accurately controlled.The "Sun Eye" control system can automaticallycompensate the change of light intensity caused by ageing or other factors.
◆ Users can easily calibrate and adjust the irradiance orthe blackboard temperature by themselves.
◆ With High precision Pt100 Temperaturesensor. Blackboard temperature is auto-controlled during the whole process
◆ Alarm function for protection：Over temperature, over heating load,bigerror for irradiance, auto shut-down protection when opening door.
◆ Touch screen and user-friendly operation interface allowoperator to set the test parameters and monitor all the test processeasily.
◆ Specimen mounting and evaluation is fast and easy Withunique slide-out specimen tray

◆ Real-time data can be collected and recorded. Theincidental USB connector allow users to copy the test data into a USB drive,achieving unattended operation. 

Bench-top Xenon lamp aging test chamber Main Technical Parameters

■ Xenon Lamp：one 1.8KW xenon lamp （imported from America or Chinese lamp）
■ Fliter：Daylight filter （Also can choose extended UV filter orwindow glass filter）
■ Lamp Lifetime：Near 1,500 hours
■ Exposure Area：1,000  cm²  (can put 9 standard samples150×70mm)
Chinese lamp：30W/m²～100W/m²（300nm～400nm）or 0.3 W/m²～0.8 W/m²（@ 340nm）or 0.5 W/m²～1.5 W/m²（@ 420nm）
American lamp：50W/m²～120W/m²（300nm～400nm）or 0.3 W/m²～1.0 W/m²（@ 340nm）or 0.5 W/m²～1.8 W/m²（@ 420nm）
■ AdjustableBlack Board Temperature Range：RT+30℃～90℃（Depends on environment temperature andsetting irradiance value）
■ Controllingirradiance point：340nm or 420nm or 300nm～400nm（show at the same time）
■ InteriorMaterial of Chamber：Stainless steel -SUS 304 material
■ ExteriorMaterial of Chamber：Powder coating 
■ Overall Size：925×600×1050mm（L×W×H）
■ NetWeight：140KG（180KG Gross weight）

■ Power Supply：220V 50/60HZ；Max. Current 16A；Max.Power 2.6 KW

※Please consult the sales for specific technical parameters, SANWOOD reserves the right of explanation.

Bench-top Xenon lamp aging test chamber,Bench-top Xenon lamp aging test chamber,Bench-top Xenon accelerated aging test chamber,Bench-top Xenon lamp weathering aging test chamber,xenon lamp test chamber,xenon lamp weathering test chamber|Sanwood