High and Low Temperature Explosion-proof Test Chamber

High and low temperature explosion-proof test chamberStructure and Characteristics:

1.It is composed of the chamber, refrigeration systems, heating systems, air circulation system and control system.

2.The working chamber is made of high quality SUS#304 stainless steel material,the outer shell adopts A3 steel plate,surface electrostatic spraying.

3.Insulation system uses superfine fiberglass wool or polyurethane foam so as to ensure the temperature of inside chamber.

4.Temperature and humidity control adopts Korean import TEMI360 programmable touch screen temperature and humidity controller, with automatic calculation of PID function.

5.Adopts steam humidifying method, automatic water circulation loop,with functions of automatic filling water.

6.Refrigeration system adopts original France "Taikang" refrigeration unit and full sets of refrigeration parts.

7.Input mode PT100 sensor.

8.The system of heating up, heating down, dehumidifying, and humidifying can be operated independently so as to reduce the cost of testing, extend the operating life of the machine and decrease the failure rate.

9.Powerful multi-wing type air circulation which can ensure even temperature distribution inside the working chamber.

10.With larger transparent viewing window and lighting inside to observe the test.

11.Door seal adopts silicone rubber material which can avoid aging and hardening in high and low temperature conditions.

12.Standard configuration with one test hole on the left side of the chamber for easy testing operation and temperature measurement.

13.With various of safety protection device such as leakage and outage protection,compressor overpressure protection,overload fusing protection,audio signal alarm.

High and Low Temperature Explosion-proof Test Chamber Specification:

Model		SMC-408-CC-FB	SMC-800-CC-FB	SMC-1000-CC-FB	SMC-1500-CC-FB
Temperature	Temperature control  range	-70℃～180℃ （A:0℃～180℃;B：-20℃～180℃；C：-40℃～180℃;D:-70℃～180℃)
	Temperature fluctuation	±0.5℃
	Cooling rate	180.0℃～-70.0℃  Within 100 mins  1.0～3.0℃/min
	Heating rate	-70.0℃～180.0℃  Within 60 mins  3.0～5.0℃/min
	Temperature uniformity	±1.5℃ (-40.0℃～100.0℃)
		±2.0℃ (100.1℃～180.0℃or-40.0℃～-70.0℃)
Humidity	Humidity control range	10.0%RH～98.0%RH (60℃ above corresponds to 10%RH)
	Humidity fluctuation	±1.0% RH
	Humidity uniformity	±2.0％RH
Material /  components	Internal material	Adopts 1.2mm thickness stainess steel(SUS304)
	External material	Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying
	Heat insulating material	100mm thickness polyurethane plate＋10mm thickness mineral wool
	Fan	Centrifugal blower
	Compressor	Semi-closed Germany Bock, Germany Bitzer
	Condenser	Air cooling, water cooling
	Refrigerant	R404A、R23、R508
	Evaporator	Fin - and - Tube Heat Exchanger
	Heater	Nickel chromium alloy heating wire
	Humidifier	Steam humidifier
Options	Standard configuration	2 ∅100MM pressure relief port, 4 explosion-prood chains
	Multipoint temperature  monitor	Adopts Sanwood developed controller, which can be used  to acquire surface temperature points of multiple products
	C02 fire extinguisher	Automatic fire extinguishing and automatic shutdown  of the machine to protect the equipment from burning
	C0, H2 gas detector	When the battery will produce gas, it will detect gas solubility  and discharge to outdoor when it exceeds the standard
	Exhaust valve	When the test sample produces harmful gas, ventilate and exhaust internally
Size	Interior size(mm) W*H*D	800*850*600	1000*1000*800	1000*1000*1000	1200*1000*1250
	Outer size(mm) W*H*D	1000*2050*1400	1200*2100*1590	1200*100*1780	1400*2100*2030
	Volume（m³)	408L	800L	1000L	1500L
	Weight	620	680	840	955
Operating ambient temperature		+5 ~ 35℃
Power supply		380V AC  50/60Hz  17A	380V AC   50/60Hz  25A	380V AC  50/60Hz  27A	380V AC  50/60Hz  50A
Controller		Standard: South Korea TEMI-1500   Optional: South Korea TEMI-2500,South Korea TEMI-2700

Sanwood Environmental Chambers Co.,Ltd, based in Taiwan. We are a direct factory which has specialized 

in manufacturing environmental test chambers for 22 years. 

Our products have exported to more than 40 countries, included USA, UK, Russia, Italy, Poland, Switzerland, etc. 

We mainly produce:

1. Temperature & humidity test chamber ( Temperature range: -75~+180C, Humidity range: 10%~98%RH)

2. High low temperature test chamber( Temperature range: -75~+180C)

3. UV weathering test chamber

4. Xenon lamp accelerated aging test chamber

5. Ozone accelerated aging test chamber

6. Thermal shock test chamber( Two-zone type and three-zone type)

7. Rapid temperature change test chamber （Heating & cooling rate: 5C/min, 10C/min, 15C/min）

8. Salt spray corrosion test chamber

9. Dust test chamber

10. Rain test chamber

11. Temperature & altitude test chamber

12. Temperature, humidity and vibration combined chamber

13. (Vacuum) drying oven

14. Vibration test system

Joy Li

Guangdong Sanwood Technology Corporation.,limited

ADD: No.88, Songchang Road, Songbotang, Changping, Dongguan, Guangdong

TEL: +86+769-81182799

FAX: +86+769-82987199

E-mail: sales7@climatic-chambers.com.tw

Website: http://www.sanwood.cc