Home » News » News » Landing Type Temperature (& Humidity) Test Chamber

Landing Type Temperature (& Humidity) Test Chamber

Views:15     Author:Site Editor     Publish Time: 2018-02-28      Origin:Site

Landing Type Temperature (& Humidity) Test Chamber


Temperature and Humidity Test Chamber Basic introduction:


Environmental test chamberr/constant temperature and humidity chamber simulating product under the condition of temperature and humidity combination (high and low temperature operation & storage, temperature cycle, high temperature and high humidity, low temperature and humidity and condensation test, etc.), check whether the adaptability and characteristics of the product itself have changed.



IMG_3364-2


Need to meet the requirements of international standard (IEC, JIS, GB, MIL...). in order to achieve International quantum measurement procedures consistency (including test steps, conditions, methods). To avoid different cognitive, and reduce uncertainly factors scope of measurement.


Six advantages of Sanwood Temperature and Humidity Test Chamber:


1.Evaporator no frosting under longtime Low temperature and low humidity running.
2.Automatic control system refrigerant demand save electricity above 30%
3.High heat load tested samples test environment
4.realize 95℃ 95%high temperature and high humidity environment.
5.10% 20 ℃ ultra-low temperature range control ability
6.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German  multilingual language switching.

IMG_3365-2

Temperature and Humidity Test Chamber Specification:


Model SMC-1000-CC SMC-1800-CC SMC-2520-CC SMC-3600-CC SMC-5000-CC SMC-8000-CC
Temperature 
Temperature control range -70℃~180 A:0℃~180;B-20℃~180℃;C-40℃~180;D:-70℃~180)
Temperature fluctuation ±0.5
Cooling rate 180.0℃~-70.0  Within 100 mins 1.03.0/min
Heating rate -70.0℃~180.0 Within 60 mins 3.05.0/min
Temperature uniformity ±1.5 (-40.0℃~100.0
±2.0 (100.1℃~180.0or-40.0℃~-70.0)
Humidity Humidity control range 10.0%RH98.0%RH( 60 above corresponds to 11%RH ) 
Humidity fluctuation ±1.0% RH
Humidity uniformity ±2.0RH 
Material / 
components 
Internal material Adopts 1.2mm thickness stainess steel(SUS304)
External material Adopts 1.2mm thickness Cold rolled steel sheet / powder spraying
 Heat insulating material 100mm thickness polyurethane plate10mm thickness mineral wool
Fan Centrifugal blower
Compressor Fully-closed/
Semi-closed
Semi-closed Semi-closed Semi-closed Semi-closed Semi-closed
Condenser Air cooling,
 water cooling
Air cooling, 
water cooling
Water cooling Water cooling Water cooling Water cooling
Refrigerant R404AR23R508
Evaporator Fin - and - Tube Heat Exchanger 
Heater Nickel chromium alloy heating wire 
Humidifier Steam humidifier 
Size  Interior size(mm)
W*H*D
1000*1000*1000 1000*1500*1200 1200*1500*1400 1200*2000*1500 1500*1800*1850 2000*2000*2000
Outer size(mm)
W*H*D
1200*1550*2450 1200*2000*2650 1400*2000*2850 1400*2350*2950 1700*2150*3300 2300*2450*3600
VolumeL) 1000L 1800L 2520L 3600L 5000L 8000L
Power supply 380V AC 50/60Hz  
Controller Standard: South Korea TEMI-1500    Optional: South Korea TEMI-2500,South Korea TEMI-2700

IMG_3363-2

Guangdong Sanwood Technology Corporation.,Limited
Add:No.88, Songchang Road, Songbotang , Changping, Dongguan,  Guangdong
Tel: +86-769-81182799
Email: 
info@climatic-chambers.com.tw

Website: www.climatic-chambers.com.tw


Leave Message
Contact Us

Guangdong Sanwood Technology Co.,Ltd

About Sanwood

Contact Info

 Tel:+86-769-81182799
 E-mail:
 info@sanwood.cc
 Add: 

No.88, Songchang Road, Songbotang, Changping, Dongguan 523560, Guangdong, China

Copyright © 2021 Guangdong Sanwood Technology Co.,Ltd
All Rights Reserved.

Site Map
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×