Rapid Temperature Change Test Chamber

Rapid Temperature Change Test Chamber description:
Rapid temperature changes (damp heat) test chamber is suitable for the whole product, parts and materials for high temperature, low temperature, high and low temperature circulating and temperature stress screening (ESS) test, and constant humidity and cyclic damp heat test. This type of machine mainly used to simulate the product in climate conditions, a temperature and humidity conditions or at ambient temperature and humidity conditions, detecting the product features and the adapt change ability. It’s the aviation, automobiles, home appliances, research and other fields necessary test equipment.

SANWOOD rapid temperature change test chamber advantages:
1.Can set the temperature variable rate of the different stress screening
2.Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
3.Meet the requirements of stress screening test for electronic equipment
4.Switching temperature and average temperature these two kinds of test methods
5.Can set a variety of stress screening (fast temperature change rate) 5deg C/min,  10deg C/min,  15deg C/min experimental conditions
6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC.
7.Can carry out the two test methods, temperature test and average temperature test
8.With aluminum sheet test machine load capacity (non plastic load)
9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc.
10.Can screen the sample load with a large number
11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program)
12.Complete real-time test curve analysis shows that no time limit
13.Can be integrated with the E management system to monitor the management system
14.Multi-language selection: Chinese, English, Russian, Korean, Japanese, German  multilingual language switching.

Rapid temperature change test chamber accessories:
1.Standard equipment
Test product load power supply 3 groups
Each side of the left and right side has a 50mm Pin hole
Pin hole silicone plug 2 PCS
Stainless steel sample holder 2 PCS
20L water storage tank 1 PCS
Pure water filter 1 PCS

Rapid temperature change test chamber Specification:

Sanwood Environmental Chambers Co.,Ltd, based in Taiwan. We are a direct factory which has specialized in manufacturing environmental 

test chambers for 22 years. 

Our products have exported to more than 40 countries, included USA, UK, Russia, Italy, Poland, Switzerland, etc. 

We mainly produce:

1. Temperature & humidity test chamber ( Temperature range: -75~+180C, Humidity range: 10%~98%RH)

2. High low temperature test chamber( Temperature range: -75~+180C)

3. UV weathering test chamber

4. Xenon lamp accelerated aging test chamber

5. Ozone accelerated aging test chamber

6. Thermal shock test chamber( Two-zone type and three-zone type)

7. Rapid temperature change test chamber （Heating & cooling rate: 5C/min, 10C/min, 15C/min）

8. Salt spray corrosion test chamber

9. Dust test chamber

10. Rain test chamber

11. Temperature & altitude test chamber

12. Temperature, humidity and vibration combined chamber

13. (Vacuum) drying oven

14. Vibration test system

Joy Li

Guangdong Sanwood Technology Corporation.,limited

ADD: No.88, Songchang Road, Songbotang, Changping, Dongguan, Guangdong

TEL: +86+769-81182799

FAX: +86+769-82987199

E-mail: sales7@climatic-chambers.com.tw

Website: http://www.sanwood.cc