Views:17 Author:Site Editor Publish Time: 2019-12-24 Origin:Site
Since its establishment in 1995, SANWOOD Technology has been focusing on the research, development, production and sales of environmental and climate test chambers. The Automobile Walk-in ESS Rapid Temperature Change Test Chamber is one of the important products that we focus on for the new energy automobile manufacturing industry. The characteristics of the chamber are adjusted according to the different test requirements of the entire vehicle or parts or related systems of the car. Prefabricated finished box boards are used to suit the requirements of any size. The assembly and installation are convenient. The 4 inch thick polyurethane foam board is used to closely interact with each other. Tighten to form a sealed test chamber.
New energy vehicles refer to all other energy vehicles except gasoline and diesel engines, including fuel cell vehicles, hybrid vehicles, hydrogen energy vehicles, and solar vehicles. Its common advantage is that the exhaust gas emissions are relatively low, in line with the concept of sustainable development supported by the world, and are increasingly loved by the majority of people.
With the acceleration of urbanization and industrialization and the rapid development of the automobile industry, the contradiction between the supply and demand of international crude oil has gradually deepened, and global climate warming has become increasingly evident.In this background, with the aim of energy conservation and emissions reduction is important new energy automotive technology constantly breakthroughs, and gradually formed with energy, mechanical and electrical new technology as the support, a variety of new energy power, covering new energy vehicle, fittings, and related services in the areas of energy storage materials, emerging industry with huge market potential, presents the fast breakthrough, competing development trend. According to incomplete statistics, there are over 4 million LPG vehicles and over 1 million natural gas vehicles in the world.
New energy vehicles are not only in China, but also an outlet for the automotive industry worldwide. "Electrification" is an irreversible trend in the automotive industry.Based on the characteristics of new energy vehicles, low-temperature, high-temperature, alternating temperature, etc. The performance of the entire vehicle and related systems under a hostile environment has always been the focus of new energy vehicle manufacturers and related component manufacturers, as well as the focus of our environmental and climate test equipment manufacturers. Based on the time and cost of the test field Characteristics, which is why environmental tests based on environmental chambers are becoming more necessary.
SANWOOD Automotive Walk-in Rapid Temperature Change Test Chamber provides accurate and rapid defect detection, fault analysis and improvement measures for new energy vehicles in automotive materials, auto parts, power batteries, automotive electronic equipment, and automotive related systems under simulated climate conditions of high and low temperature and rapid change.Whether in the automotive development stage or the production stage, it is a good choice. It also has the following characteristics:
1.Can set the temperature variable rate of the different stress screening;
2.Can perform a rapid temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc;
3.Walk In ESS Test Chamber Meet the requirements of stress screening test for electronic equipment;
4.Switching temperature and average temperature these two kinds of test methods;
5.Can set a variety of stress screening (fast temperature change rate) 5deg C/min, 10deg C/min, 15deg C/min experimental conditions;
6.Meet the requirements of stress screening test for electronic equipment MIL-STD-2164, MIL-344A-4-16, MIL-2134A-19, NABMAT-9492, GJB-1032-90, GJB/Z34-5.1.6, IPC-9701....ETC;
7.Can carry out the two test methods, temperature test and average temperature test;
8.With aluminum sheet test machine load capacity (non plastic load);
9.Single machine can perform fast temperature change (ESS), condensation test, high temperature and humidity test, temperature and humidity cycling test, etc;
10.Can screen the sample load with a large number;
11.Built in two-way USB2.0 portable storage interface (can copy the test curve and load the test program);
12.Complete real-time test curve analysis shows that no time limit;
13.Can be integrated with the E management system to monitor the management system;
14.Mufti-language selection: Chinese, English, Russian, Korean, Japanese, German multilingual language switching.
As the basis of vehicle production, the quality of automotive materials and parts is the prerequisite for the success of vehicle production.With the increasingly perfect functions of various new models and people's continuous pursuit of ride experience and safety, automobile manufacturers are required to monitor the quality and safety of materials at the source.Nowadays, the new energy automobile industry is showing a booming trend and is likely to become the mainstream of the automobile industry in the future.
Following the development pace of the new energy vehicle industry, SANWOOD plans to invest 10% of its fixed income in technology r&d in the coming year.This item,our ESS Rapid Temperature Change Chamber will be improved in product performance optimization, product upgrade, reduce energy consumption, increase service life and other aspects.It is worth mentioning that the vehicle test solution is an important research area for us in 2020, including vehicle environmental experiment, vehicle full-spectrum solar simulation test box and road simulation environment room.
SANWWOD Technology focus environmental reliability testing test equipment for 25 years, in terms of product development and production has the abundant technical strength and the design and manufacturing experience, product quality performance has been highly recognized by customers both at home and abroad, if you want to know more about customer case, more information about the vehicle test solutions, please pay attention to mark technology website:www.sanwood.cc or E-mail:firstname.lastname@example.org
Linkedin home page：www.linkedin.com/company/sanwood
Walk-in ESS Rapid Temperature Change Test Chamber|Automobile Industry|New Energy|environmental test chamber|SANWOOD
Guangdong Sanwood Technology Co.,Ltd