Home » Products » Material Test Machines » SM-UTM-8000A series Big Load Universal Test Machines 200KN

Product Category

SM-UTM-8000A series Big Load Universal Test Machines 200KN

Share to:

Sanwood UTM are widely use for different material testing, like semi-product & finished product made of rubber, plastic, metal, nylon, non-woven fabrics, textile, tape, polyfoam, waterproof materials, wire, cable, etc. With different test jigs or fixtures, the UTM can run the tensile, compression, shearing foce, adhesion, peeling force, tear strength, fatigue, etc test according to GB, CNS, ASTM, ISO, DIN, JIS, EN test standards.

Sanwood's UTM machines are the basic facilities for incoming quality control(I.Q.C), Quality Control(Q.C.), Physical inspection, Mechanics research and material development.

Availability:

Quantity:



Inquire Add to Basket

Model:
SM-UTM-8000A
Brand:
SANWOOD
Code:
SM-UTM-8000A

Product Description

Product Description

The SM-UTM-8000A series are designed for measuring strength in tension, compression, bend, flexure, tear, peel, shear and adhesion testing, etc; It has a wide space and large capacity and applicable for heavy duty grips which are capable to test rigid specimens under different test grips/jigs.

Test materials: building materials, for springs, for pipes, for sheet metal, for paper, for cement, for wire ropes and strands, for textiles, for bars and tubes

Model no.: SM-UTM-8000A-20

Capacity: 200KN(20T) (custom-made available)

Unit(Switchable) - N,KN,Kgf,Lbf

Sensor accuracy - ±0.01%FS

Force resolution - 1/500,000

Precision grade - ±0.5%

Accuracy of measurement - ±0.5%F.S

Effective measuring range - 0.2%~100%F.S

Effective stretch space - 800mm (without fixture)

Effective measurde width - 600mm

Test speed range - 0.001~350mm/min

Deformation measurement: 10~1000mm.