Sanwood Salt Spray Chamber,Salt Spray Test Chamber,Salt Spray Corrosion Chamber,Salt Spraying Chamber,Salt spraying test chamber is exported to Russia, Europe, USA, Canada and so on.
1：It adopts 5mm or 8mm imported gray and white impact resistant P.V.C board, with high temperature resistance up to 85℃ and corrosion resistance.
2：Support frame: ¢ 10MM fiberglass rod, corrosion resistant. The steel V-frame and the fiber rod angle are placed to ensure the specimen is inclined at 15-30 degrees.
3：Pressure barrel is welded seamlessly with 2.0MMSUS304 stainless steel plate
4：The heating adopts titanium alloy electric heating tube. It has high corrosion resistance and long service life is 3-5 years higher than ordinary stainless steel heating tube.
5：The cover is made of 5MM imported transparent (Germany YLIS) acrylic sheet. It has fine workmanship, beautiful appearance and high transparency.
Salt Spray Chamber summary:
This 60L Humidity And Temperature Salt Spray Corrosion Test Chamber is a machine that the testing condition is the closest to the natural environment,it simulated condition that more often meet at natural environment, and then deteriorated the natural environment to be tested, such as the salt spray, dry, wet, room temperature, low temperature environment,it can be tested in any order or individually tested.
Salt Spray Chamber Applicable Industry:
This Humidity And Temperature Salt Spray Corrosion Test Chamber is tested the corrosion resistance capacity of products, which stay in the intense change environment, such as automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems,
Salt Spray Chamber Features:
1.Salt spray test chamber With color touch screen LCD controller (Japan OYO U-8256P), which can record the testing curves.
2.Control mode: temperature, humidity, temperature and humidity can do alternating control by the program.
3.Program Group Capacity: 140Pattern (Group) 1400Step (above) each program can be set up to Repest99 segment.
4.Each executive mode time can be arbitrarily set 0-999 hours, 59 minutes.
5.Each group can be arbitrarily set the cycle of 1-999 .
6.Has the power memory function, recovery after power continue to perform the not completed the test.
7 . interface RS232 connect with computer.
Salt Spray Chamber Corresponding standard:
1.GB/T 20854-2007 Dry and wet salt spray test
2.ISO14993-2001 Dry and wet salt spray test
Salt Spray Chamber Specification:
|Testing room volume（L)||108||270||480||800||1440|
|Brine tank capacity（L)||15||25||40|
|Max Consumption Power（KW)||1.5||2.5||3.5||5||7|
|Operating ambient temperature, humidity||<35℃，<85%RH|
|Testing room temperature||Brine test method(NSS ACSS)35℃±1℃/Erosion-resistant testing method (CASS)50℃±1℃|
|Pressure Pot Temperature||Brine test method(NSS ACSS)47℃±1℃/Erosion-resistant testing method(CASS)63℃±1℃|
|Brine solubility||5% Sodium Chloride Solution or add 0.26 grams copper dichloride in the 5% Sodium |
Chloride Solution per liter (CuCl2 2H2O)
|Compressed air pressure||1.00±0.01kgf/cm2|
|Spraying amount||1.0~2.0ml/80cm2/h (Collect 16 hours at least, take their average)|
|Inside and outside material||Imported corrosion resistant, anti-aging, high strength PVC board|
|Heater||Corrosion resistance U type titanium tube|
|Temperature controller||LED digital display temperature controller, touch screen controller|
|Spraying mode||Continuous,intermittent spraying|
|Safety device||Over temperature protection switch, leakage protection, status warning lamp|
Guangdong Sanwood Technology Co.,Ltd