Views:72 Author:Site Editor Publish Time: 2018-08-10 Origin:Site
Salt Spray Corrosion Test Chamber summary:
This 60L Humidity And Temperature Salt Spray Tester Supplier is a machine that the testing condition is the closest to the natural environment,
it simulated condition that more often meet at natural environment, and then deteriorated the natural environment to be tested, such as the salt spray, dry, wet, room temperature, low temperature environment,it can be tested in any order or individually tested.
This Humidity And Temperature Salt Spray Tester Supplier is tested the corrosion resistance capacity of products, which stay in the intense change environment, such as automobile parts, aviation equipment, photographic equipment, building materials, electricity, electrical and electronic systems,
Salt Spray Corrosion Test Chamber Features:
1.With color touch screen LCD controller (Japan OYO U-8256P), which can record the testing curves.
2.Control mode: temperature, humidity, temperature and humidity can do alternating control by the program.
3.Program Group Capacity: 140Pattern (Group) 1400Step (above) each program can be set up to Repest99 segment.
4.Each executive mode time can be arbitrarily set 0-999 hours, 59 minutes.
5.Each group can be arbitrarily set the cycle of 1-999 .
6.Has the power memory function, recovery after power continue to perform the not completed the test.
7 . interface RS232 connect with computer.
1.GB/T 20854-2007 Dry and wet salt spray test
2.ISO14993-2001 Dry and wet salt spray test
Salt Spray Corrosion Test Chamber Specification:
|Testing room volume（L)||108||270||480||800||1440|
|Brine tank capacity（L)||15||25||40|
|Max Consumption Power（KW)||1.5||2.5||3.5||5||7|
|Operating ambient temperature, humidity||<35℃，<85%RH|
|Testing room temperature||Brine test method(NSS ACSS)35℃±1℃/Erosion-resistant testing method (CASS)50℃±1℃|
|Pressure Pot Temperature||Brine test method(NSS ACSS)47℃±1℃/Erosion-resistant testing method(CASS)63℃±1℃|
|Brine solubility||5% Sodium Chloride Solution or add 0.26 grams copper dichloride in the 5% Sodium|
Chloride Solution per liter (CuCl2 2H2O)
|Compressed air pressure||1.00±0.01kgf/cm2|
|Spraying amount||1.0~2.0ml/80cm2/h (Collect 16 hours at least, take their average)|
|Inside and outside material||Imported corrosion resistant, anti-aging, high strength PVC board|
|Heater||Corrosion resistance U type titanium tube|
|Temperature controller||LED digital display temperature controller, touch screen controller|
|Spraying mode||Continuous,intermittent spraying|
|Safety device||Over temperature protection switch, leakage protection, status warning lamp|
Sanwood Environmental Chambers Co.,Ltd, based in Taiwan. We are a direct factory which has specialized in
manufacturing environmental test chambers for 22 years.
Our products have exported to more than 40 countries, included USA, UK, Russia, Italy, Poland, Switzerland, etc.
We mainly produce:
1. Temperature & humidity test chamber ( Temperature range: -75~+180C, Humidity range: 10%~98%RH)
2. High low temperature test chamber( Temperature range: -75~+180C)
6. Thermal shock test chamber( Two-zone type and three-zone type)
7. Rapid temperature change test chamber （Heating & cooling rate: 5C/min, 10C/min, 15C/min）
ADD: No.88, Songchang Road, Songbotang, Changping, Dongguan, Guangdong
Guangdong Sanwood Technology Co.,Ltd