Sand and Dust Test Chamber

Sand and Dust Test Chamber use：
Dust test chamber is suitable for all kinds of auto parts to do dust and dust test,Test parts include a light.Meter.Electric dust jacket.Steering system.Door lock, etc.

Meet the standard：  
Sand dust test chamber has a wide range of temperature and humidity control, which can meet the national standard GB4208GB/T2423.37-198
《Basic environmental testing procedures for electric and electronic products》

Sand and Dust Test Chamber Test principle:
Test chamber door attached to the window, the door to the lower part of the electrical control area,Simulated sand dust of talc in the 

lower hopper of the test chamber. Use the of circulating fan and automatic jar will be blown into the upper network studio talcum powder 

through a 75 micron square hole,The test space form high density dust shape, test specimen.

Sand and Dust Test Chamber Structure:
1.  LCD Touch Screen Programmable Sand and Dust Ingress Testing MachineInner material: Stainless steel (SUS #304)
2.  LCD Touch Screen Programmable Dust Proof Test Equipment Outer material:  Powder painting steel plate
3.  Dust Test Equipment use imported touch screen programmable controller, can control dust blowing motor, dust
vibration and test time.
4.  With sealing good chamber door, has lock device and glass observation window.There is lamp and dust brush to
ensure easy observation of inner chamber.
5.  With strong dust blowing device and vibrator to ensure informity of each blowing.
6.  Circulating air supplying device: Frequency converter and high pressure motor to ensure the air volume more
precision.
7.  Large diameter strong stainless steel air hose, covered with heating device, can heat and dry the test chamber dust.
8.  Anti-explosion handle, easy operation, strurdy and durable.
9.  Imported high-precision electronic temperature humidity sensor and air speed sensor.
10.  Test sample differential pressure test device, can set pumping rate freely according to sample inquiry.
11.  There is a ψ50mm test hole on the left chamber and equipped with port lid and silica gel chock plug. Through this
hole can connect to outer test device.
12.  There are casters with brake equipments and fixing foot pad to make the machine easy operation and level adjustment.
13.  With voltage current indicator, equipped with corresponding sample DC12V power, DC24V / 20 a, interval, continuous power supply 

adjustable. Dust concentration wind speed regulating function. May control test total time, blow the dust of time interval and blowing dust 

cycle and sample with the power source of the intermittent time.
14.  Vacuum system: Equipped with pressure meter, air filtration, dust dehumidification system, regulating triple pieces,connecting pipe 

(Vacuum pump should be prepare by customer)

Sand and Dust Test Chamber Specification：

Sanwood Environmental Chambers Co.,Ltd, based in Taiwan. We are a direct factory which has specialized in 

manufacturing environmental test chambers for 22 years. 

Our products have exported to more than 40 countries, included USA, UK, Russia, Italy, Poland, Switzerland, etc. 

We mainly produce:

1. Temperature & humidity test chamber ( Temperature range: -75~+180C, Humidity range: 10%~98%RH)

2. High low temperature test chamber( Temperature range: -75~+180C)

3. UV weathering test chamber

4. Xenon lamp accelerated aging test chamber

5. Ozone accelerated aging test chamber

6. Thermal shock test chamber( Two-zone type and three-zone type)

7. Rapid temperature change test chamber （Heating & cooling rate: 5C/min, 10C/min, 15C/min）

8. Salt spray corrosion test chamber

9. Dust test chamber

10. Rain test chamber

11. Temperature & altitude test chamber

12. Temperature, humidity and vibration combined chamber

13. (Vacuum) drying oven

14. Vibration test system

Joy Li

Guangdong Sanwood Technology Corporation.,limited

ADD: No.88, Songchang Road, Songbotang, Changping, Dongguan, Guangdong

TEL: +86+769-81182799