Home » News » SANWOOD shipped a One Cube Three-zone Thermal Shock Test Chamber

SANWOOD shipped a One Cube Three-zone Thermal Shock Test Chamber

Views: 14     Author: Site Editor     Publish Time: 2018-09-26      Origin: Site

2018.09.26 SANWOOD shipped a  One Cube Three-zone Thermal Shock Test Chamber

Three-zone Thermal Shock Test Chamber can be used in testing composite material and material structure’s 

result which under continuous environment with high temperature or low temperature shock in short time;

Here share some photos .


Thermal Shock Test Chamber -General introduction

High low temperature(Three Zone)Thermal shock chamber is consist of High temperature test area(Pre-heating area), Low temperature 

test area(Pre-cooling)area and test area(RT), adopt independent wind path switching mode to transfer hot and cold air to test area make 

sure the high low temperature swift, the test sample shall not move during the test. The test chaber is suitable for the examination of the 

whole set of products, components, parts and materials subjected to rapid changes in temperature. The temperature impact test chamber 

are used in a shortest time to evaluate the test samples due to thermal expansion and contraction caused by the changes of chemical or 

physical damage. materials industry .


Thermal Shock Test Chamber -Product Feature:

1.Modern design, latest modular creation technology ,perfect control power.

2.The chamber will automatically defroste after it cycle for 700H or more

3.Patent design initiative observation window to achieve visual effects

4.Color screen 32 control system Ethernet E management, USB data access, APP mobile platform management

5.Programmable load power 4 ON/OFF output control, to protect the products safety

6.Unique air circulation system

7.Unique anti condensation function and over temperature, breezeless, smoke protection function

8.Can expand the network video monitoring function, and data test synchronization

9.The most environmentally friendly refrigeration capacity control, energy saving and fast rising/cooling temperature rate

10. Auto return to room temperature setting

11.Diagnostic system for information on operating times and possible failures.

12.The device can expand the remote service function and provide the machine using a mathematical disc


Thermal Shock Test Chamber- Product accessories

1.Standard equipment

Test product load power supply 3 groups

Each side of the left and right side has a 50mm Pin hole

Pin hole silicone plug 2 PCS

Stainless steel sample holder 2 PCS

Compressed air drying filter


Thermal Shock Test Chamber -Optional equipment

Isolated transducer, Protection device for testing product ( Sample protection to meet the standards NE60519-2.1993)

100mm diameter Pin hole

Nitrogen auxiliary device

Spare parts package

E management and Networking software

Video monitoring system

APP mobile platform management

Thermal Shock Test Chamber Specification:

Model SM-50-3P-A SM-80-3P-A SM-100-3P-A SM-150-3P-A SM-200-3P-A
Temperature  Temperature impact
-70℃~150℃ (A:-45℃~150℃;B:-70℃~150℃;)
Low temperature 
precooling time 
25.0℃~-70.0℃  Within 60 mins 1.0~3.0℃/min
High temperature 
preheating time 
25.0℃~200.0℃  Within 60 mins  3.0~7.0℃/min
 conversion time 
 recovery time 
Within 5 mins Within 10 mins
Material / 
Internal material Stainless steel(SUS304)
External material Cold rolled steel sheet / powder spraying
 Heat insulating 
100mm thickness polyurethane plate+10mm thickness mineral wool
Fan Centrifugal blower
Compressor France Tecumseh, Germany Bock, Germany Bitzer
Condenser Air cooling, water cooling water cooling
Refrigerant R404A、R23、R508
Evaporator Fin - and - Tube Heat Exchanger 
Heater Nickel chromium alloy heating wire 
Size  Interior size(mm)
350*400*350 400*500*400 500*500*400 500*600*500 650*460*670
Outer size(mm)
1400*1750*1750 1450*1850*1800 1550*1850*1800 1550*2050*2050 1700*2000*2200
Volume(L) 50L 80L 100L 150L 200L
Operating ambient temperature +5 ~ 35℃
Power supply 380V AC  50/60Hz
Controller SANWOOD SH5600:Equipped with RS232 port;(7.0 inch controller) USB data export )

Sanwood Environmental Chambers Co.,Ltd, based in Taiwan. We are a direct factory which has specialized in 

manufacturing environmental test chambers for 22 years. 

Our products have exported to more than 40 countries, included USA, UK, Russia, Italy, Poland, Switzerland, etc. 


We mainly produce:

1. Temperature & humidity test chamber ( Temperature range: -75~+180C, Humidity range: 10%~98%RH)

2. High low temperature test chamber( Temperature range: -75~+180C)

3. UV weathering test chamber

4. Xenon lamp accelerated aging test chamber

5. Ozone accelerated aging test chamber

6. Thermal shock test chamber( Two-zone type and three-zone type)

7. Rapid temperature change test chamber Heating & cooling rate: 5C/min, 10C/min, 15C/min

8. Salt spray corrosion test chamber

9. Dust test chamber

10. Rain test chamber

11. Temperature & altitude test chamber

12. Temperature, humidity and vibration combined chamber

13. (Vacuum) drying oven

14. Vibration test system



Joy Li

Guangdong Sanwood Technology Corporation.,limited

ADD: No.88, Songchang Road, Songbotang, Changping, Dongguan, Guangdong

TEL: +86+769-81182799

Leave Message
Contact Us

Guangdong Sanwood Technology Co.,Ltd

UV Lamp Weathering Test Chamber

About Sanwood

Contact Info

 Tel: +86-769-81181588
 E-mail: Info@sanwood.com

No.98 Changtian Road,Changping Town,Dongguan 523561, Guangdong, China
Leave a Message
Leave Message
Copyright © 2024 Guangdong Sanwood Technology Co.,Ltd
All Rights Reserved.

Site Map
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.